Cable equipment
LSZH flame-retardant building wire is increasingly used where fire safety, low smoke and reduced toxic emissions are important. To improve processing performance, SINGCHEER worked with material suppliers to develop screw and barrel configurations tailored to LSZH compounds. The resulting increase in material output brings LSZH production closer to PVC levels.
With a tandem drawing and extrusion configuration, a medium-drawing line can produce LSZH building wire at up to 1,000 m/min: up to 1,000 m/min for 1.5 mm², 800 m/min for 2.5 mm², 600 m/min for 4 mm² and 200 m/min for 6 mm². A large-drawing line can reach up to 1,200 m/min and process 8 mm copper rod directly into building wire.
The same line configurations can also process PVC, PE, XLPE and self-crosslinking LSZH materials. Depending on the setup, concentricity can exceed 95%, with diameter tolerance below 1% of the nominal diameter.
Features include high-frequency preheating for consistent conductor temperature, controlled cooling for stable high-speed production, low-tension multi-pass spray cooling to prevent stretching, and three-stage drying to remove water from the cable surface. High-speed printing, online inspection, tension monitoring and automatic cutting and reel changing support consistent production. Pay-off and take-up can be connected to AGVs, while the CAT system, IoT modules and smart meters can connect to SCADA for production monitoring.